Getting started by hauling in the pre-bent boards. |
Lots of hands are required to get the boards lined up. |
After four layers are in place they are fixed with deck screws. Necessary to free up clamps for the next board. |
|
Bexter applying additional wood preservative. Resawing the 2x4s exposed the untreated core of the board so additional treatment was required. We used Woodlife Coppercoat (copper napthenate) brush on preservative. |
Jordan getting the hard to reach areas. |
The glue station. |
The correct number of clamps is n+1. |
Setting the last few boards on the ground berm to the proper radius. |
Final progress on the ground berm from today. |
6000 lbs of white oak decking delivered. This pile weights more than the car parked behind it. |
|