2015 Large Surly Ice Cream Truck

[SweetSVT99]

I am selling my 2015 Surly Ice Cream Truck. This is an amazing riding Fat Bike on both snow and singletrack, one of my favorite bikes I've ever owned!

I have added the following:
-RaceFace Turbine Crankset
-Direct Mount RaceFace Narrow/Wide chainring
-42t e.Thirteen Extended Cog - in blue of course
-Both wheels setup tubeless. Rim strips are made from marine grade vinyl, which is way more durable and easy to clean than using tape. Fresh Stans as of this morning. This setup has been absolutely bulletproof for me, even sitting in my shop since July 12th when I hurt my knee both tires still were holding air just fine.

STOCK COMPONENTS, WITH THE EXCEPTION OF THE FRONT SHIFTER (WHICH WAS DONATED TO A LOCAL RIDER'S TOUR DIVIDE ADVENTURE) ARE ALL INCLUDED. That means the original Surly Crankset, Bottom Bracket, Front Derailleur and the Problem Solvers FD Mount come with the bike.

The Diety Bladerunner Pedals are not included, but I'm willing to negotiate if the buyer wants them.

Stock ICT Specs:
-Frameset
Frame: Surly Ice Cream Truck, 100% Surly 4130 CroMoly steel. ED coated. Triple-butted main triangle. TIG-welded
Fork: Surly Ice Cream Truck, Tapered straight blade 4130 CroMoly. 483mm axle to crown, 47mm offset. 51mm IS front standard disc mount. 150mm x 15mm thru axle dropouts (axle included).
Seatpost clamp: Surly Constrictor, 33.1mm

-Drivetrain
Crankset: Surly O.D., 22/36t
Bottom Bracket: Surly Press Fit BB, PF 41/132 w/sleeve
Front Derailleur: Shimano SLX FD-M676D, Problem Solvers direct mount adapter. Top-pull. Black
Rear Derailleur: Shimano Deore XT RD-M786 SGS, Black
Cog or Cassette: Shimano SLX CS-HG81-10, 10-speed 11–36t
Chain: KMC x10RB, Silver

-Components
Headset: Cane Creek 40, ZS44/EC44
Brakes: SRAM Guide RS, Hydraulic with reach adjust
Brake Levers: SRAM, Black
Shifters: Shimano SLX 670, 2 x 10
Stem: Kalloy; AS025N, 31.8mm. 7° rise. 4-bolt. Aluminum. Black
Handlebar: Salsa ProMoto 2, 31.8mm. 11° bend. Black
Saddle: Velo VL2155, Steel rails. Black vinyl. Feels pretty o.k.
Seatpost: Kalloy SP-342, 30.9mm. Black
Extras: Dual water bottle mounts, Surly Trip Guide full line guides for brake and derailleurs, fender and rack eyelets

-Wheels
Front Hub: Salsa, 150 x 15mm thru axle
Rear Hub: Salsa, 197x12mm thru axle
Rims: Surly Clown Shoe, Single wall aluminum. Welded seam w/cutouts. 100mm width. Foil Helmet.
Spokes: DT Swiss Comp, 14g/15g Black
Tires: Surly Bud & Lou, 4.8", 120tpi

The only issues with the bike are:
-Chain rub on the chainstay up by the chainring from when it had the 2x drivetrain. This will never be a problem again with the 1x!
-I removed the 11t to make way for the 42t extended cog. Apparently the torque was too much for the aluminum freehub body with the 13t in place and stripped it out. I set the limit screw to not allow the rear derailleur to go down into that gear and haven't looked back since - all other gears are just fine.

$2100!

Contact Steve at Five Six 3 - 508 - Six 33 Seven or at ho99and@gmail (.com)

IMG_20150201_112818745_HDR.jpgIMG_20150829_094457992.jpgIMG_20150829_094509776.jpgIMG_20150829_094738701.jpgIMG_20150829_094825203.jpg